![Solar Power System & Lighting Solutions Solar Power System & Lighting Solutions](/uploads/image/20231222/13/solar-power-system-lighting-solutions.jpg)
Generally speaking, the width of rural roads is mostly between 3 meters to 5 meters, so the height of the street light pole is generally chosen to be 5 meters or 6 meters high, which is sufficient. Too high will increase the cost and cause the waste of resources, while too low affects the aesthetics.
More and more rural areas are installing village solar light street lamps, so village solar motion street lights what wattage of LED lamp head is appropriate, which can meet the lighting needs and is also affordable. For the choice of lamp head power for rural solar LED street lights, many customers hardly understand, blindly pursuinghigh power, high configuration, believing that high-power lamp heads have good lighting effect. In fact, for normal rural use 30W to 50W is already enough, city roads use about 60W to 100W. Moreover, high-power lamp heads themselves are difficult to apply to solar LED street lights. If used, it will also affect solar LED street lights.
Solar light Street Lamps if using high-power lamp heads, the battery storage capacity is hard to meet the lighting duration, just this point makes the high-power lamp heads unsuitable for solarLED street lights, speaking of which solar LED street lights have always been energy-efficient, only by matching the appropriate power of LED lamp head can this be achieved.
If you insist on village solar motion street lights using high-power lamp heads, then to light up the lamp heads, definitely requires a big solar panel, the area of the solar panel will be very large, too large solar panels will inevitably cause a greater load on the street light pole, in windy weather, the force area is too large, increasing the risk factor, and safety hazards exist.This would be counterproductive.
Finally discussing the heat dissipation issue, as long asinvolvingelectricity heat will be produced, just like how our mobile phones heat up when charging. Then, the energy consumption and heat dissipation of high-power lamp heads are not ideal, high-power lamp heads will generate more heat when lighting up, the heat cannot be dissipated upwards, which can easily cause the street lamp fixture to overheat. Seriously affectingthe lifespan of village solar light street lamps, and even due to overheating of the lamp head causing it to burn and fall off, endangering the safety of pedestrians.
Generally speaking, Solar light Street Lamps 5 meters or 6 meters match well with 30 watts or 40 watts LED lamp head, if there are special requirements, 50 watts can also be used, but solar motion street light manufacturers do not recommend blindly matching higher power LED lamp heads.